Kitchen Parametric Revit Family
The Kitchen Parametric Revit Family represents an extensive investment to develop a single-family designed from the ground up to take advantage of the advanced parametric capabilities of Revit and gather all the possibilities and constraints that the user might require suiting the design. Therefore, you can create any kind of Kitchen by filtering options through tick boxes.
Kitchen Shape
l / L / l l / U
The Kitchen Family supports different layouts for the user to choose.
Simply select:
- [1] for Linear Shape [ l ]
- [2] for L Shape [L]
- [3] for U Shape [U]
- [4] for Parallel Shape
Kitchen Overall Dimensions
Width / Length
Add the dimensions of the space where you want to suit the kitchen
Simply add:
- [Length] for Linear Shape [ l ]
- [Width and Length] for L Shape [L]
- [Width, Length and Length_02 ] for U Shape [U]
- [Length and Length_02] for Parallel Shape
Top Units Required?
Bottom Units / Top Units
Specify if Top Units are required
Number of Units
Bottom Units / Top Units
Add the number of units/cabinets to have for each configuration type
Simply add:
- [Length] for Linear Shape [ l ]
- [Width and Length] for L Shape [L]
- [Width, Length and Length_02 ] for U Shape [U]
- [Length and Length_02] for Parallel Shape
Unit accessories and appliances
Cooker
The user can add a cooker to the kitchen configuration by:
- Yes/No Parameter ☑
- Unit Location ①
- Fridge type ①
Fridge
The user can add a fridge to the kitchen configuration by:
- Yes/No Parameter ☑
- Unit Location ②
- Cooker type ①
Sink
The user can add a Sink to the kitchen configuration by:
- Yes/No Parameter ☑
- Unit Location ①
- Sink type ①
- Tap type ②
Extractor
The user can add an Extractor to the kitchen configuration by:
- Yes/No Parameter ☑
- Unit Location ①
- Extractor type ①
- Tap type ②
.
Corner units
Since version 3.2 the All-in-One Kitchen Unit lets you set up any combination of a Corner Unit. You are not limited to just doors on each side as you can now simply adjust any Unit you can set up with this amazing Revit Kitchen Family to be part of the Corner Unit.
With version 3.4 the All-in-One Kitchen Unit adds even more flexibility for setting up your individual Corner Unit with the new 45 degrees Corner Unit as well as the free adjustable Worktop which solves now all the nasty corner solutions where the walls do not meet at 90 degrees.
Floor units
Single / Double Door
The Kitchen Unit supports different door variations and to switch between those is mostly just one single parameter to change.
The double door option also allows switching between swing and sliding doors.
Drawers
Another front option is drawers that are fully parametric, so you just need to choose how many drawers you need.
Wall units
Floor and wall units are basically the same just differentiating by the value of a few parameters. That makes it easy to set up consistent units between floor and wall.
If you don’t want Doors, just switch them off. Works for floor and wall units the same way.
More Flexibility with Drawer
The single parametric Revit Family provides all the flexibility to set up the Drawer Unit you need. You define how many Drawers and if you need a fixed Height or if they should be fitted in height automatically. This is an amazing simple to use the feature and makes the best Revit Kitchen Family even better.
Symbol Lines in Elevation & Plan ViewNew
From version 2, the Kitchen unit supports adjustable symbol lines. Just create an elevation and plan view and get a ready Kitchen Plan with all required symbol lines. As our customers come from all over the world – we have taken care about localization as well – Yes, you can even control the direction of the symbol lines as they are variating in different countries … Arrow from or to Hinge.